SVIT-A/ SVIT-B/ SVIT-C
The SHAKTI Two for One Twister Winder are designed for the production of twisted yarns and twines using natural and/or synthetic fibers in the range of 5,000 – 120,000 deniers / 10,000 – 300,000 deniers / 20,000 – 600,000 deniers of different machine range.
The externally strong mono-block frame is well balanced and operates vibration free.
The covers assure low noise level, due to their high noise-proof efficiency and in accordance with the most rigid standards.
All moving parts have been studied for optimal ease of operation allowing the machine to operate at high RPM & TPM.
​
Starting from yarn spools or bobbins, this machine is suitable for making spool from min. 4”x4” to max. 12”x12” / min. 8”x8” to max. 16”x16” / min. 12”x12” to max. 20”x24” range, equipped with main A.C. driving motors, with mandrel – multiple type for the production of spools with tube – expansion type with link rods for spools without tube.
Screw boxes are available from 4” to 12” / 8” to 16” / 12” to 24” traverse.
​
ACCUMULATOR, High-speed pre-twister, In-line Twisting System and Creels are also available for any kind of twisters as per customer's demand.
The main features of the machine are:
-
Main A.C. motor with speed change by means of digital control panel.
-
Motor with increased performances , which enables to save energy, increasing the life of motor and bearings, with a lower noise.
-
Digital control panel with meter-counter for automatic stopping of the twister at achievement of preselected length of the spool.
-
Change machine twists direction S/Z through the operator panel.
-
Inside lightening.
-
Electrical yarn braking device complete with additional braking with 5 pulleys.
-
Draw compensator.
-
Electric-electronic control board.
-
Sensor for the speed feedback, which allow to carry out a proportional/integrative control in order to increase the precision, compared to the set set-point. Moreover, it allows to further increase the machine safety by means of an interblock of the protection.
-
Alarm signal on the digital display, so to carry out a diagnosis of the status of the machine, as for example the intervention of the protections.